field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

Engineer II - Aerospace Center (Temp)Job ID: 13606Location: El Paso, TXFull/Part Time: Full TimeRegular/Temporary: RegularAbout UTEP<a href="https://www.utep.edu/UTEP" target="_blank">https://www.utep.edu/UTEP</a> is a comprehensive public research university that is increasing access to excellent higher education. We advance discovery of public value and positively impact the health, culture, education, and economy of the community we serve.The University of Texas at El Paso is America's leading Hispanic-serving university. Located at the westernmost tip of Texas, where three states and two countries converge along the Rio Grande, 84% of our 24,000 students are Hispanic, and more than half are the first in their families to go to college. UTEP offers 172 bachelor's, master's and doctoral degree programs at the only open-access, top-tier research university in America.<a href="https://www.utep.edu/engineering/The" target="_blank">https://www.utep.edu/engineering/The</a> College of Engineering at the University of Texas at El Paso (UTEP) is dedicated to fostering innovation, education, and research in engineering and technology. With a mission to prepare the next generation of engineers, the college offers a wide range of undergraduate, graduate, and doctoral programs across various disciplines. Its diverse faculty and cutting-edge research facilities drive discoveries and solutions to real-world challenges, contributing to advancements in science, technology, and the overall growth of the Border Region. UTEP's College of Engineering is committed to academic excellence, community engagement, and shaping the future of engineering.<a href="https://www.utep.edu/aerospace/The" target="_blank">https://www.utep.edu/aerospace/The</a> Aerospace Center at The University of Texas at El Paso (UTEP) — we serve as a nexus for innovation, forging strategic partnerships across a dynamic ecosystem (a New Frontier Ecosystem!) of government agencies, industry leaders, small businesses, venture studios, venture capital firms, other research centers, and national laboratories. By translating and integrating cutting-edge research with real-world applications, our partnerships accelerate breakthroughs, cultivate entrepreneurial ventures, and drive the future of aerospace technology.Position InformationHiring Department: <a href="https://www.utep.edu/aerospace/Posting" target="_blank">https://www.utep.edu/aerospace/Posting</a> End Date: Open until filled.Hours: 40 hours per week, standard Monday- Friday 8:00am- 5:00pm, flexibility is required on evenings and weekendsFLSA status: ExemptEarliest Start Date: As soon as possible.Salary: $74,244 annually.Required Application Materials:• Resume• Cover Letter (prefered)• List of three references (optional)Note: This position is subject to availability of funds.The primary accountabilities are intended to describe the general content of and requirements of this position and are not intended to be an exhaustive statement of duties. Incumbents may perform all or some of the primary accountabilities listed. Specific tasks or responsibilities will be documented in the incumbents' performance objectives as outlined by the incumbents' immediate supervisor or manager. This position is security-sensitive and subject to Texas Education Code §51.215, which authorizes the employer to obtain criminal history record information. A valid driver's license issued by the State where the applicant resides and insurability as defined in UTS 157 may be required to perform the position's essential functions.Purpose of PositionSummary: Performs highly complex (journey-level) engineering, research, or oversight work. Provides engineering support on systems, system elements, interfacing systems, components, devices, and processes.Note: The primary accountabilities below are intended to describe the general content of and requirements of this position and are not intended to be an exhaustive statement of duties. Incumbents may perform all or some of the primary accountabilities listed below. Specific tasks or responsibilities will be documented in the incumbents' performance objectives as outlined by the incumbents' immediate supervisor or manager. This position is security-sensitive and subject to Texas Education Code §51.215, which authorizes the employer to obtain criminal history record information. A valid driver's license issued by the State where the applicant resides and insurability as defined in UTS 157 may be required to perform the position's essential functions.Statement of Duties and Responsibilities:Develops strategic and implementation plans.Contributes to system architecture and design including software, hardware, communications and interface requirements.Provides definition, trade-off and design support.Reviews, evaluates and analyzes designs.Prepares, reviews and evaluates documentation specifications, test plans and procedures.Performs analysis to define, analyze and allocate requirements.Supports test programs and analyses testing.Operates small UAS and related systems in support of tests.Performs analysis of requirements and components and performs audits to ensure intended functionality and performance is achieved.Conducts installation and maintenance of systems/equipment, and provides associated training to customer personnel.Diagnoses, isolates and correct problems to component level to restore system's functions.Formulates conceptual design of aeronautical or aerospace products or systems to meet customer requirements.Directs and coordinates activities of engineering or technical personnel designing, fabricating, modifying, or testing of aircraft or aerospace products.Directs and coordinates activities of engineering or technical personnel designing, fabricating, modifying, or testing of aircraft or aerospace products.Plans and conducts experimental, environmental, operational and stress tests on models and prototypes of aircraft and aerospace systems and equipment.Writes technical reports and other documentation such as handbooks and bulletins, for use by engineering staff, management, and customers.Directs research and development programs and/or projects.Reads and interpret blueprints, technical drawings, schematics, and computer-generated reports.Confers with engineers and other personnel to implement operating procedures, resolve system malfunctions, and provide technical information.Researches and analyzes customer design proposals, specifications, manuals, and other data to evaluate the feasibility, cost, and maintenance requirements of designs or applications.Specifies system components or directs modification of products to ensure conformance with engineering design and performance specifications.Researches, designs, evaluates, installs, operates, and maintains mechanical products, equipment, systems and processes to meet requirements, applying knowledge of engineering principles.Oversees installation, operation, maintenance, and repair to ensure that machines and equipment are installed and functioning according to specifications.Designs electronic components, software, products or systems for commercial, industrial, medical, military, or scientific applications.Provides technical support and instruction to staff or customers regarding equipment standards, assisting with specific, difficult in-service engineering.Analyzes system requirements, capacity, cost, and customer needs to determine feasibility of project and develop system plan.Confers with engineers, customers, vendors or others to discuss existing and potential engineering projects or products.Reviews and evaluate work of others, inside and outside the organization, to ensure effectiveness, technical adequacy and compatibility in the resolution of complex engineering problems.Prepares documentation containing information such as confidential descriptions and specifications of proprietary hardware and software, product development and introduction schedules, product costs, and information about product performance weaknesses.Knowledge of all Microsoft Office software and able to learn and use institutional software systems.Maintains software using git version control system.Maintains task and issue documentation for project tracking.Complies with all State and University policies.Other duties may be assigned.Travel is required.Location: Position reports to on campus and/or off campus facilities (Tornillo, TX and field sites)Supervisory Responsibilities No supervisory responsibilities.QualificationsQualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Required Qualifications:Education: Bachelor's degree in Engineering, Science, or related field.andExperience: Eight years of experience, related to the statement of duties and responsibilities; or equivalent combination of education and experience.Preferred Qualifications: Broad knowledge of aerospace industry practices, standards and technology areas. FAA part 107 certificate and experience operating small UAS. Experience implementing complex software-driven systems using message passing architectures.Additional InformationPhysical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee is frequently required to sit and talk or hear. The employee is occasionally required to stand; walk and use hands to feel. The employee must occasionally lift and/or move up to 30 pounds. The employee must be medically qualified to operate small UAS as remote pilot in command and visual observer.Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.,In keeping with its access, excellence and impact mission, The University of Texas at El Paso is committed to an open, diverse, and inclusive learning and working environment that honors the talents, respects the differences, and nurtures the growth and development of all. We seek to attract faculty and staff who share our commitment.The University of Texas at El Paso is an Equal Opportunity/Affirmative Action employer. The University does not discriminate on the basis of race, color, national origin, sex, religion, age, disability, genetic information, veteran status, sexual orientation, or gender identity in employment or the provision of services in accordance with state and federal law. Discrimination on the basis of sex includes an employee's or prospective employee's right to be free from sexual harassment under Title IX of the Higher Education Amendments of 1972. Inquiries—including the filing of a Formal Complaint or reporting an incident—about the application of Title IX may be referred to the Title IX Coordinator, who can be reached by phone at (915) 747-8358, by email at <a href="mailto:titleix@utep.edu" target="_blank">mailto:titleix@utep.edu</a>, or by mail at 500 W. University Ave., El Paso, TX, Kelly Hall, Room 312.For accommodation information for employees and applicants with disabilities, please contact UTEP's Equal Opportunity Office at <a href="mailto:eoaa@utep.edu.To" target="_blank">mailto:eoaa@utep.edu.To</a> apply, visit <a href="https://apptrkr.com/6297874jeid-22cd3a25e7170745833d3c4429e812fb" target="_blank">https://apptrkr.com/6297874jeid-22cd3a25e7170745833d3c4429e812fb</a>

The University of Texas at El Paso

Engineer II - Aerospace Center (Temp)

The Maintenance Mechanic provides technical expertise and labor to maintain college equipment for a safe, comfortable environment for students, faculty, staff and community.
Essential Functions:
<ol>
<li>Conducts preventative maintenance program through inspections and system evaluation.</li>
<li>Duties include electrical, plumbing Heating Ventilation Air Condition (HVAC) repairs, facility structural repairs, facility renovations and/or construction.</li>
<li>Recommends materials and methods of accomplishment and issues material requisitions</li>
<li>Assists supervisor in campus keying systems. Cut and issue keys, make cores and repair locks and hardware.</li>
<li>Monitor building HVAC control through Energy Management computer system and schedule HVAC in buildings during occupied times</li>
<li>Monitor powerhouse equipment, perform necessary testing on heating and cooling water loops&nbsp; to ensure proper chemical levels</li>
<li>Works safely under all conditions.</li>
<li>Must be&nbsp; available for work after hours and on weekends per schedule.</li>
</ol>
Supplemental Functions:
<ol>
<li>Ability to make decisions.</li>
<li>Ability to operate effectively without supervision.</li>
<li>Ability to work in a team environment.</li>
<li>Ability to relate to a diverse faculty, staff and student population.</li>
<li>Utilize Purchasing systems to order needed parts/supplies</li>
<li>Performs other duties as assigned.</li>
</ol>
Education, Training and Experience Required:
<ol>
<li>High school diploma or equivalent.</li>
<li>Ability to read and interpret blueprints.</li>
<li>Minimum three (3) years experience in multi-skilled maintenance position in including electrical and industrial HVAC experience</li>
<li>Valid Tennessee driver’s license.</li>
<li>Basic Electrical Certification</li>
<li>Basic computer skills</li>
</ol>
Education, Training and Experience Preferred:
<ol>
<li>&nbsp;EPA Refrigeration Certification</li>
</ol>
Working Conditions:
<ol>
<li>Ability to lift up to 40 lbs.</li>
<li>Some bending, stooping and climbing.</li>
<li>Ability to work in all weather conditions.&nbsp;</li>
</ol>
Titles Supervised:
None
Hiring Salary Range: $35,200- 42,230
This position is based at the Columbia, TN Campus.

About Columbia State Community College:
As Tennessee’s first community college (established in 1966), Columbia State is committed to increasing access and enhancing diversity at all five of our campuses.&nbsp; Columbia State is a member of the Tennessee Board of Regents.&nbsp; Columbia State is known for excellence both inside and outside the classroom.
Columbia State offers a comprehensive benefits package, including but not limited to the following:
<ul>
<li>Vacation and Sick Leave</li>
<li>14 paid holidays</li>
<li>Medical, dental, vision and life insurance</li>
<li>Retirement plans</li>
<li>Optional 401K and 403B Deferred Compensation Plans</li>
<li>Educational benefits for the employee and their spouse and dependents</li>
</ul>
Columbia State Community College does not discriminate on the basis of race, color, religion, creed, ethnicity or national origin, disability, age, status as a protected veteran, genetic information, or any other class protected by Federal or State laws and regulations and by Tennessee Board of Regents policies with respect to employment, programs, and activities. The following person has been designated to handle inquiries regarding nondiscrimination policies: Executive Director of Human Resources <a href="mailto:humanresources@columbiastate.edu" target="_blank">humanresources@columbiastate.edu</a> 1665 Hampshire Pike, Columbia, TN 38401 931-540-2501

Motlow State Community College


      Maintenance Mechanic
    

SUMMARY:&nbsp; The Facilities Maintenance Technician is responsible for daily support and execution of campus facilities maintenance, custodial services and other general campus operations.&nbsp; Incumbent must strive to provide a safe, clean and efficiently operating campus environment supportive of learning and growth.&nbsp; This role requires the familiarity with cleaning procedures, chemicals, cleaning equipment as well as a variety of trades including, but not limited to basic plumbing, carpentry, minor electrical, roofing, landscaping and various HVAC systems.&nbsp; Qualified applicants must perform as the main point of contact for all campus facility related requests, while adhering to all safety protocols. University philosophy is considered in carrying out duties and responsibilities of position: quality services to clients (students, faculty, staff &amp; visitors); development, growth, involvement, and recognition of employees; sound economic principles; and environment which is conducive to innovation, positive thinking and expansion. KEY JOB ELEMENTS: <ul><li>Clean and monitor the campus facilities to ensure a safe, clean, efficiently operating and productive work environment. </li><li>Meet with campus vendors, contractors, security and suppliers as directed by Facilities Management. </li><li>Coordinate and execute facilities/grounds maintenance and janitorial needs as directed by Facilities Management, may work alone or with a crew. </li><li>Assist Facilities Management in schedule and organize any service work performed by technicians, vendors and contractors relative to repairs, cleaning and security operations. </li><li>Perform maintenance repairs for basic plumbing, minor electrical, carpentry, HVAC systems, roofing and general landscaping. </li><li>Consult with Facilities Management before calling in outside services or contractors. </li><li>Conduct regular building rounds and submit reports to Facilities Management to ensure your area of responsibility is clean and that cleaning and maintenance crews are keeping their assigned facilities clean and equipment in working order. </li><li>Respond to client inquires and complaints. Ensure timely and quality service delivery to clients. Follow up with clients to ensure customer satisfaction. </li><li>Setup group moves and events within campus and set the example by maintaining your assigned area clean and direct cleaning staff to ensure their areas are clean and orderly. </li><li>Maintain office and desk key inventory including inventory control and an accurate list of keys assigned to employees and contractors. </li><li>Maintain a detailed understanding of the campus facilities systems and equipment </li><li>Order and maintain inventory of building materials and supplies as required </li><li>Ensure South University standards of performance and safety are maintained. </li><li>Keep and maintain accurate work records </li><li>Other duties as needed. &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp; </li></ul>REQUIREMENTS:&nbsp;<ul><li>High school degree required. </li><li>2-5 years of solid experience in the maintenance industry preferably in a post-secondary institution. </li><li>Understands working methods and procedures used in cleaning and minor maintenance of buildings </li><li>Understands qualities and uses of all cleaning equipment and maintenance tools </li><li>Excellent written and verbal communication skills. Strong interpersonal skills with a wide variety of populations. </li><li>Superior organization, prioritization, self-motivation, and problem resolution skills. </li><li>Ability to analyze problems and recommend solutions. </li><li>Must be a well-rounded individual who can perform on a variety of cleaning and maintenance tasks each day. </li><li>Ability to interact effectively as a leader or a team member and work collaboratively with other departments. </li><li>Ability to listen to customers (students, faculty, staff and visitors) and to understand and respond positively to their requests </li><li>Ability to work without close supervision and to set one’s own priorities. </li><li>Ability to frequently lift up to 25 pounds and occasionally lift up to 50 pounds. </li><li>Ability to stand and walk for lengthy periods of time. </li></ul>Physical or Sensory Demands:&nbsp;<ul><li>Frequently lift up to 25 pounds, occasional heavy lifting of up to 50 pounds </li><li>Occasionally climbs up to 15 feet with a ladder </li><li>Exposure to heavy dust, dirt, chemical or paint fumes, or other airborne matter </li><li>Exposure to extreme heat, electric current, hazardous chemicals or other potential hazards </li><li>Sitting or standing for extended periods with no control over rest periods </li><li>Pushes/pulls brooms, vacuums, buffers, scrubbers, cleaning carts </li><li>Must bend, stoop and crawl and occasionally operate hedge trimmers, pressure washers and leaf blowers </li></ul>ENVIRONMENT:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. The term "qualified individual with a disability" means an individual with a disability who, with or without reasonable accommodation, can perform the essential functions of the position.&nbsp; While performing the duties of this job, the employee is regularly required to communicate professionally in person, over the telephone, video conference, through&nbsp;email and other electronic means, move about the office or school, handle various types of media and equipment, and visually or otherwise identify, observe and assess.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; South University is an Equal Opportunity Employer and embraces diversity as a critical step in ensuring employee, student and graduate success. We are committed to building and developing a diverse environment where a variety of ideas, cultures and perspectives can thrive. JobFamilyAll PositionsEducationLevelHigh School

South University

Facilities Maintenance Technician 

Title: Associate Instructor of Industrial Maintenance/Mechatronics
Employee Classification:&nbsp;Faculty
Institution:&nbsp;TCAT-Knoxville
Department: Special Industry
Campus Location: TCAT Knoxville - Anderson County Higher Education Center
Job Summary
The Tennessee College of Applied Technology Knoxville is excited to invite applications for a full-time Associate Instructor of Industrial Maintenance/Mechatronics. This position, based at TCAT Knoxville's Anderson County Higher Education Center, offers a 37.5-hour workweek, Monday through Friday, from 7:30 AM to 3:30 PM, with a thirty-minute lunch break. As an accredited post-secondary technical college recognized by the Council on Occupational Education, TCAT Knoxville is dedicated to providing quality education and training, and we look forward to welcoming a passionate educator to our team.
Job Duties&nbsp;
•&nbsp;Instruction: Facilitate the classroom instructional process: evaluate and monitor student progress; assign grades; provide academic assistance to students; maintain attendance and grade records; counsel and advise students on career goals; work to retain students; maintain required classroom and office hours.
• Course and Curriculum Development: Select texts, equipment, supplies, and other learning resources; participate in the purchase of needed program supplies and equipment; develop instructional materials; create and revise courses and/or curricula as needed; maintain updated course syllabi;
• Professional Growth: Remain current within the instructional field and technologies; acquire, maintain, and apply knowledge of current instructional methodologies and materials; attend scheduled college and division professional development and in-service activities; support related professional organizations; participate in the annual faculty evaluation process.
• Service to Students: Comply with FERPA laws; participate in advising, recruitment, admissions, and orientation of potential students; assist students with job placement upon graduation; support student activities, including SkillsUSA and NTHS.
• Service to the College and Community: Assist in the recruitment and selection of college personnel as assigned; participate in accreditation, assessment, and performance funding processes; support and participate in the College’s decision-making processes; provide input and assistance with budgets; attend convocation and commencement exercises and participate in mandatory college programs; develop and maintain positive and cooperative relationships with colleagues; maintain an active program advisory committee; complete the annual Council on Occupational Education (COE) report for the program as well as accreditation requirements.
• Perform other duties as assigned by supervisor and/or administration, on and off campus - (Essential)
Minimum Qualifications
• Graduate from an Industrial Maintenance/Mechatronics diploma program, or have an Associate’s degree in an industrial maintenance or mechatronics-related field • Minimum of three years’ work experience in the related field 
Preferred Qualifications
• Teaching experience and/or experience in higher education
Knowledge, Skills, and Abilities
&nbsp;Knowledge of college policies, procedures, and practices; and other applicable laws pertaining to employment and education; ability to plan, organize and implement assigned responsibilities and to work well under pressure to meet deadlines; excellent organizational, analytical and planning skills; ability to participate as a team member, ability to understand and interpret rules and regulations, and ability to adjust to change; ability to handle confidential material judiciously; understanding of education programs and tools. Utilize current College and/or department information technology, including but not limited to Microsoft Office, Teams, Outlook, Ellucian Banner, etc.
PHYSICAL DEMANDS AND WORKING ENVIRONMENT: The conditions herein are representative of those that must be met by an employee to perform the essential functions of this job successfully. 
Environment: Work is performed in a classroom and shop setting with frequent interruptions and distractions. The majority of work performed (30 hours per week) will be instructing and training students, with the remaining 7.5 hours utilized for grading, recording attendance, and individual student meetings.&nbsp;
Physical: Primary functions require sufficient physical ability and mobility to work in a classroom and clinical health care setting.
SALARY: Commensurate with education and experience according to Tennessee Board of Regents guidelines within the ranges of $55,983 - $67,181.
APPLICATION SUBMISSION &amp; REVIEW: To be considered for a position at TCAT Knoxville, you must create and submit an online application that includes your required documents. Your skills, abilities, qualifications, and years of experience will be evaluated using what is recorded on your application. Please be sure to include the complete beginning and end dates under your employment history. Scan and attach the required documents to the online application in Word or PDF format. Review of applicants will begin immediately and continue until the position is filled.
REQUIRED DOCUMENTS: Resume Educational transcripts/diploma Industry licensure and/or certifications
EMPLOYMENT DOCUMENTS: Current federal law requires identification and eligibility verification prior to employment. Only U.S. citizens and aliens authorized to work in the United States may be employed. An offer of employment is contingent upon a successful background check.


      Associate Instructor of Industrial Maintenance/Mechatronics
    

Elevator Maintenance Mech IIIJob ID: 10087Location: El Paso, TXFull/Part Time: Full TimeRegular/Temporary: RegularFLSA StatusNon-ExemptPosting End DateOpen until filledEarliest Start DateAs soon as possible.SalarySalary commensurate with education and experienceHours per Week40.00 Standard from 8:00 AM to 5:00 PM; flexibility required on evenings and weekendsHiring DepartmentFacilitiesPlease NoteNote: The primary accountabilities below are intended to describe the general content of and requirements of this position and are not intended to be an exhaustive statement of duties. Incumbents may perform all or some of the primary accountabilities listed below. Specific tasks or responsibilities will be documented in the incumbents' performance objectives as outlined by the incumbents' immediate supervisor or manager. This position is security-sensitive and subject to Texas Education Code §51.215, which authorizes the employer to obtain criminal history record information. Must possess a valid driver's license issued by the State where the applicant resides and must be insurable as defined in the UT System UTS 157, as applicable to the performance of essential duties and responsibilities of the position.Purpose of PositionPerforms highly complex (senior-level) elevator maintenance work such as assemble, install, repair, and/or maintain electric or hydraulic freight or passenger elevators, or dumbwaiters . Performs complex elevator control trouble-shooting on mechanical and electrical elevator systems. Applies quality control measures that assure that all preventive maintenance is completed in a professional, efficient and timely manner. Supervises projects, repairs and personnel. Prepares and conducts annual and 5-year safety tests on elevator systems.Essential FunctionsImplements programs to assure all UTEP elevators pass annual and other state inspections. Checks and assures quality control that safety regulations and building codes are met, and completes service reports verifying conformance to standards.Adjusts safety controls, counterweights , door mechanisms, and components such as valves, ratchets, seals, and brake linings.Assembles electrically powered stairs, steel frameworks, and tracks, and installs associated motors and electrical wiring. Assembles elevator cars, installing each car's platform, walls, and doors. Assembles, installs, repairs, and maintains elevators, escalators, moving sidewalks , and dumbwaiters , using hand and power tools, and testing devices such as test lamps, ammeters , and voltmeters.Identifies and maintains guide shoes and rollers to minimize the lateral motion of cars as they travel through shafts ; bolts or welds steel rails to the walls of shafts to guide elevators, working from scaffolding or platforms; assists in connecting car frames to counterweights, using steel cables. Connects electrical wiring to control panels and electric motors. Cuts prefabricated sections of framework, rails, and other components to specified dimensions . Operates elevators to determine power demands, and test power consumption to detect overload factors.Disassembles defective units, and repairs or replaces parts such as locks, gears, cables, and electric wiring. Inspects, trouble shoots, and repairs wiring connections, control panel hookups, door installations, and alignments and clearances of cars and hoist ways to ensure that equipment will operate properly. Installs electrical wires and controls by attaching conduit along shaft walls from floor to floor, then pulling plastic-covered wires through the conduit. Installs outer doors and door frames at elevator entrances on each floor of a structure. Trouble shoots and repairs malfunctions in brakes, motors, switches, and signal and control systems, using test equipment. Tests newly installed equipment to ensure that it meets specifications, such as stopping at floors for set amounts of time.Maintains log books that detail all repairs and checks performed. Maintains skills up-to-date by attending assigned or designated trainings .Reads and interprets blueprints to determine the layout of system components, frameworks, and foundations, and to select installation equipment.Works various schedules and is required to carry a pager and be On-call.Knowledge of all Microsoft Office software and able to learn and use institutional software systems. Complies with all State and University policies.Other duties may be assigned.Carries out supervisory responsibilities in accordance with the organization's objectives, policies and applicable laws.Required QualificationsA resume, cover letter, and a list of 3 professional references will be required to apply.Required QualificationsTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.High school diploma or GED.Five years of experience , related to the statement of duties and responsibilities; or equivalent combination of education and experience . Knowledge of machines and tools, including their designs , uses, repair, and maintenance . Knowledge of materials, methods, and the tools involved in the elevator service industry. Knowledge of relevant equipment , policies, procedures, and strategies to promote effective local, state, or national security operations for the protection of people, data, property, and institutions. Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models. Occasional travel may be required.Possesses a current valid Texas driver's license.Preferred QualificationsCET Certification and/or IUEC Mechanic card.Working ConditionsThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job , the employee is frequently required to stand; walk ; use hands to feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. The employee must occasionally lift and move up to 25 pounds. Specific vision abilities required by this job include color vision, peripheral vision, depth perception and ability to adjust focus . May be required to wear Personal Protective Equipment to include: Steel toe or Non-slippery shoes, back belt, ear plugs, eye protection, and gloves.The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions .While performing the duties of this job , the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to risk of electrical shock . The employee is occasionally exposed to high, precarious places and vibration . The noise level in the work environment is usually moderate.EO/AA StatementIn keeping with its Access and Excellence mission, The University of Texas at El Paso is committed to an open, diverse, and inclusive learning and working environment that honors the talents, respects the differences, and nurtures the growth and development of all. We seek to attract faculty and staff who share our commitment.The University of Texas at El Paso is an Equal Opportunity / Affirmative Action Employer. The University does not discriminate on the basis of race, color, national origin, sex, religion, age, disability, genetic information, veteran status, or sexual orientation and gender in employment or the provision of services in accordance with state and federal law. Discrimination on the basis of sex includes an employee's or prospective employee's right to be free from sexual harassment under Title IX of the Higher Education Amendments of 1972.For accommodation information for employees and applicants with disabilities, please contact UTEP's Equal Opportunity Office at <a href="mailto:eoaa@utep.edu.To" target="_blank">mailto:eoaa@utep.edu.To</a> apply, visit <a href="https://apptrkr.com/6291423jeid-22c7c18cb1425b44b4f466dbe6961245" target="_blank">https://apptrkr.com/6291423jeid-22c7c18cb1425b44b4f466dbe6961245</a>

Elevator Maintenance Mech III

Plumber IIJob ID: 12550Location: El Paso, TXFull/Part Time: Full TimeRegular/Temporary: RegularAbout UTEPUTEP is a comprehensive public research university that is increasing access to excellent higher education. We advance discovery of public value and positively impact the health, culture, education, and economy of the community we serve.The University of Texas at El Paso is America's leading Hispanic-serving university. Located at the westernmost tip of Texas, where three states and two countries converge along the Rio Grande, 84% of our 24,000 students are Hispanic, and more than half are the first in their families to go to college. UTEP offers 172 bachelor's, master's and doctoral degree programs at the only open-access, top-tier research university in America.Position InformationHiring Department: FacilitiesPosting End Date: Open until filled.Hours: 40 hours per week, standard Monday- Friday 8:00am- 5:00pm, flexibility is required on evenings and weekendsFLSA status: Non-exemptEarliest Start Date: As soon as possible.Salary: Commensurate with education and experience.Required Application Materials:• Resume• Cover Letter• List of three referencesThe primary accountabilities are intended to describe the general content of and requirements of this position and are not intended to be an exhaustive statement of duties. Incumbents may perform all or some of the primary accountabilities listed. Specific tasks or responsibilities will be documented in the incumbents' performance objectives as outlined by the incumbents' immediate supervisor or manager. This position is security-sensitive and subject to Texas Education Code §51.215, which authorizes the employer to obtain criminal history record information. A valid driver's license issued by the State where the applicant resides and insurability as defined in UTS 157 may be required to perform the position's essential functions.Purpose of PositionEssential FunctionsAssembles install, or repair pipes, fittings, or fixtures of heating water, or drainage systems, according to the specifications or plumbing codes. Assemble, install, alter, and repair pipe lines or pipe systems that carry water, steam, air, or other liquids or gases. May install mechanical control systems.Performs trouble shooting and repairs of water lines, gas lines, sanitary sewer, storm water conveyance and\ alterations of utility lines to accommodate the installation of new fixtures. drain cleaning machine.Locates and marks underground pipe in existing locations throughout campus.Perform inspection and repairs of back flow preventersJoins pipes by use of screws, bolts, fittings, solder, pvc solvent, and caulks joints by approved methods.Repairs and maintains existing plumbing fixtures.Purchases and controls inventories shop supplies, machinery and equipment.Generate a report of work orders needed to address shop issues.Estimates labor and material cost; reports the estimate to supervisor before submitting to work control system.Trouble shoots systems to determine root cause of the problem and make the necessary corrective measures.Implements installation and maintenance of plumbing systems based on as built blueprints and equipment M and O manuals.Must be available on an “On Call” and after regular hours including work for the support of events and emergencies.Frequently works without direct supervision.Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo. This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods.Proficient knowledge of TCEQ regulations and laws.Review blueprints, building codes and specifications to determine work details, procedures, including ADA standards and methods. Work with Planning and Construction in the execution and inspection of their construction projects.Inspects all equipment in the direct area of the work order is in good working order. Generate work orders when needed and follow up with the necessary repairs or adjustments.Take the lead on repair and installation projects. From planning to the execution of the work to its fruition.Knowledge and experience to identify quickly analyze emergencies, actions, and events. Identify information by categorizing, prioritizing, recognizing differences / similarities, and detecting changes in circumstances or events.Generate and maintain a daily log, detailed annual work reports, backflow certifications and general plumbing shop records.Locates and marks position of pipe and pipe connections and passage holes for pipes in walls and floors.Cuts openings in walls and floors to accommodate pipe and pipe fittings.Ability to cut and thread all pipe by approved methods.Assembles and installs valves, pipe fittings, and pipes composed of metals, such as iron, steel, brass, and lead, and nonmetals, such as glass, vitrified clay, and plastic by approved methods.Basic knowledge of Microsoft Excel, Outlook, word and the internet. Must have the ability to learn institutional software systems.Knowledge of arithmetic, algebra, geometry, statistics, and their applications.Other duties may be assigned.No supervisory responsibilities.QualificationsTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.Required Qualifications:Education: High School diploma or (GED)andExperience: Four years of verified experience in the plumbing industry. Ability to obtain a Backflow Preventer License within one year of employment.Texas Journeyman Plumber License required.Preferred Qualifications: Backflow Preventer License preferred.Additional InformationThe physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee must frequently stand and walk. The employee must regularly sit; use hands to feel; reach with hands and arms; and talk or hear. The employee must lift and move up to 50 pounds.The noise level for this work environment is usually moderate.In keeping with its access, excellence and impact mission, The University of Texas at El Paso is committed to an open, diverse, and inclusive learning and working environment that honors the talents, respects the differences, and nurtures the growth and development of all. We seek to attract faculty and staff who share our commitment.The University of Texas at El Paso is an Equal Opportunity / Affirmative Action Employer. The University does not discriminate on the basis of race, color, national origin, sex, religion, age, disability, genetic information, veteran status, or sexual orientation and gender in employment or the provision of services in accordance with state and federal law. Discrimination on the basis of sex includes an employee's or prospective employee's right to be free from sexual harassment under Title IX of the Higher Education Amendments of 1972.For accommodation information for employees and applicants with disabilities, please contact UTEP's Equal Opportunity Office at <a href="mailto:eoaa@utep.edu.To" target="_blank">mailto:eoaa@utep.edu.To</a> apply, visit <a href="https://apptrkr.com/6291444jeid-e875311a6ad2d04b884cdb8ea81f8faa" target="_blank">https://apptrkr.com/6291444jeid-e875311a6ad2d04b884cdb8ea81f8faa</a>

Plumber II

Job Title Facilities IWMS Implementation Co-Lead Requisition Number TE08899 Department Name 3C000:VP - Facilities Work Location Lexington, KY Salary Range $61.78/HR Type of Position Temporary Position Time Status Full-Time Required Education Required Related Experience Required License/Registration/Certification Physical Requirements Standing or walking with objects up to 25lbs; Sitting at computer workstation for extended periods; Repetitive motion May be exposed to loud noises, fumes, confined spaces, and/or weather and temperature extremes while reviewing and/or traveling to/from a job-site(s). Shift Expected Hours: 16-20/week 8:00am – 5:00pm (Monday – Friday)Hours of work may vary dependent upon situational factors, emergencies, and crisis management requiring evening(s), weekend(s), and holiday(s) response. Job Summary Reporting to the Facilities Financial &amp; Business Services Director this position will serve as a co-lead for Facilities Management’s new Integrated Work Management System (IWMS) implementation which includes ReADY, AiM, and Go modules. Position will entail oversight of data gathering, business process analysis, report development, development of dashboards &amp; widgets, testing, data validation, and training initiatives. Position will work with the new Facilities Financial Strategy Officer to transition current duties. Skills / Knowledge / Abilities Does this position have supervisory responsibilities? No Preferred Education/Experience Deadline to Apply 06/17/2025 Our University Community We value the well-being of each of our employees and are dedicated to creating a healthy place for everyone to work, learn and live. In the interest of maintaining a safe and healthy environment for our students, employees, patients and visitors the University of Kentucky is a Tobacco &amp; Drug Free campus. As an Equal Opportunity Employer, we strongly encourage veterans, individuals with disabilities, women, and all minorities to consider our employment opportunities. Any candidate offered a position may be required to pass pre-employment screenings as mandated by University of Kentucky Human Resources. These screenings may include a national background check and/or drug screen.

University of Kentucky

Facilities IWMS Implementation Co-Lead

SUMMARY:The Facilities Maintenance Technician is responsible for daily support and execution of campus facilities maintenance, custodial services and other general campus operations.Incumbent must strive to provide a safe, clean and efficiently operating campus environment supportive of learning and growth.This role requires the familiarity with cleaning procedures, chemicals, cleaning equipment as well as a variety of trades including, but not limited to basic plumbing, carpentry, minor electrical, roofing, landscaping and various HVAC systems.Qualified applicants must perform as the main point of contact for all campus facility related requests, while adhering to all safety protocols. University philosophy is considered in carrying out duties and responsibilities of position: quality services to clients (students, faculty, staff &amp; visitors); development, growth, involvement, and recognition of employees; sound economic principles; and environment which is conducive to innovation, positive thinking and expansion. KEY JOB ELEMENTS: <ul><li>Clean and monitor the campus facilities to ensure a safe, clean, efficiently operating and productive work environment. </li><li>Meet with campus vendors, contractors, security and suppliers as directed by Facilities Management. </li><li>Coordinate and execute facilities/grounds maintenance and janitorial needs as directed by Facilities Management, may work alone or with a crew. </li><li>Assist Facilities Management in schedule and organize any service work performed by technicians, vendors and contractors relative to repairs, cleaning and security operations. </li><li>Perform maintenance repairs for basic plumbing, minor electrical, carpentry, HVAC systems, roofing and general landscaping. </li><li>Consult with Facilities Management before calling in outside services or contractors. </li><li>Conduct regular building rounds and submit reports to Facilities Management to ensure your area of responsibility is clean and that cleaning and maintenance crews are keeping their assigned facilities clean and equipment in working order. </li><li>Respond to client inquires and complaints. Ensure timely and quality service delivery to clients. Follow up with clients to ensure customer satisfaction. </li><li>Setup group moves and events within campus and set the example by maintaining your assigned area clean and direct cleaning staff to ensure their areas are clean and orderly. </li><li>Maintain office and desk key inventory including inventory control and an accurate list of keys assigned to employees and contractors. </li><li>Maintain a detailed understanding of the campus facilities systems and equipment </li><li>Order and maintain inventory of building materials and supplies as required </li><li>Ensure South University standards of performance and safety are maintained. </li><li>Keep and maintain accurate work records </li><li>Other duties as needed. </li></ul>REQUIREMENTS: <ul><li>High school degree required. </li><li>2-5 years of solid experience in the maintenance industry preferably in a post-secondary institution. </li><li>Understands working methods and procedures used in cleaning and minor maintenance of buildings </li><li>Understands qualities and uses of all cleaning equipment and maintenance tools </li><li>Excellent written and verbal communication skills. Strong interpersonal skills with a wide variety of populations. </li><li>Superior organization, prioritization, self-motivation, and problem resolution skills. </li><li>Ability to analyze problems and recommend solutions. </li><li>Must be a well-rounded individual who can perform on a variety of cleaning and maintenance tasks each day. </li><li>Ability to interact effectively as a leader or a team member and work collaboratively with other departments. </li><li>Ability to listen to customers (students, faculty, staff and visitors) and to understand and respond positively to their requests </li><li>Ability to work without close supervision and to set one’s own priorities. </li><li>Ability to frequently lift up to 25 pounds and occasionally lift up to 50 pounds. </li><li>Ability to stand and walk for lengthy periods of time.</li></ul>Physical or Sensory Demands: <ul><li>Frequently lift up to 25 pounds, occasional heavy lifting of up to 50 pounds </li><li>Occasionally climbs up to 15 feet with a ladder </li><li>Exposure to heavy dust, dirt, chemical or paint fumes, or other airborne matter </li><li>Exposure to extreme heat, electric current, hazardous chemicals or other potential hazards </li><li>Sitting or standing for extended periods with no control over rest periods </li><li>Pushes/pulls brooms, vacuums, buffers, scrubbers, cleaning carts </li><li>Must bend, stoop and crawl and occasionally operate hedge trimmers, pressure washers and leaf blowers</li></ul>ENVIRONMENT:The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. The term "qualified individual with a disability" means an individual with a disability who, with or without reasonable accommodation, can perform the essential functions of the position. While performing the duties of this job, the employee is regularly required to communicate professionally in person, over the telephone,video conference,through email and other electronic means, move about the office or school, handle various types of media and equipment, and visually or otherwise identify, observe and assess.South University is an Equal Opportunity Employer and embraces diversity as a critical step in ensuring employee, student and graduate success. We are committed to building and developing a diverse environment where a variety of ideas, cultures and perspectives can thrive.JobFamilyAll PositionsEducationLevelHigh School

Position Title: Maintenance II/Grounds Department: Plant Operations and Maintenance (POM) Division: Facility, Plant, Operations and Maintenance (FPO) Employee Status: Full Time (Monday-Thursday 7am-5pm) Type: Support Staff Association (SSA UNION) Grade: 8 Salary: ($19.03 - $20.87 hourly) FLSA: Non-exempt ____________________________________________________ Reporting Relationships Reports to: Director Plant Operations and Maintenance (POM) Supervision Exercised: None &nbsp; Job Summary Under the supervision of the assigned supervisor, perform skilled, semi-skilled, or unskilled grounds maintenance work and other related work as requested. &nbsp; Essential Duties and Responsibilities include the following. Related duties may be assigned. &nbsp; 1. Perform various manual labor tasks including loading, unloading, lifting, and moving materials. 2. Operate grounds maintenance equipment. 3. Assist in the maintenance and planting of lawn areas, flower beds, weeding and tree trimming. 4. Paint, stain and finish various campus surfaces. 5. Assist with snow removal. 6. Have knowledge of commonly used concepts, policies, procedures, and safety measures. 7. Perform minor repairs and maintenance on lawn and garden equipment. 8. Apply pesticides and fertilizer. 9. Assist with cold-patching of asphalt. 10. Maintain athletic fields. 11. Regular attendance is expected. 12. Using tact and courtesy, the ability to establish and maintain effective relationships with persons contacted in the course of work. &nbsp; Physical Abilities 1. Visual ability to read handwritten or typed documents, instructions, the display screen of various equipment and machines, and blue prints and schematics. 2. Able to conduct verbal conversation. 3. Able to hear normal range verbal conversation (approximately 60 decibels). 4. Able to sit, stand, stoop, kneel, bend, and walk. 5. Able to climb slopes, stairs steps ladders. 6. Able to push and/or pull a variety of tools, equipment and objects weighing up to 40 pounds. Able to lift up to 40 pounds frequently, and 60 pounds occasionally. 7. Able to sustain strenuous manual labor for 10 hours, with 3 breaks. 8. Able to exhibit full range of motion for shoulder external rotation an internal rotation. Able to exhibit full range of motion for shoulder abduction and adduction. Able to exhibit full range of motion for elbow flexion and extension. Able to exhibit full range of motion for shoulder extension and flexion. Able to exhibit full range of motion for back lateral flexion. Able to exhibit full range of motion for hip flexion and extension. Able to exhibit full range of motion for knee flexion. 9. Able to use respirators, for personal protection, up to: 2 hours per day, strenuous physical effort, 3 hours per day, moderate physical effort, 6 hours per day, light physical effort. 10. Able to work at various elevated heights in ladders, scaffolding, rigging and roofs in a safe and effective manner. Able to work in restricted spaces in a safe and effective manner. 11. Able to work with a variety of chemical agents in a safe and effective manner without allergic reaction. 12. Able to demonstrate manual dexterity necessary to perform fine maintenance procedures and operate both manual and power hand tools in a safe and effective manner. 13. Able to operate a variety of powered industrial vehicle equipment, and tools associated with building repair, maintenance, preventative maintenance and construction in a safe and effective manner. 14. Able to operate a variety of maintenance motor vehicles in a safe and effective manner. &nbsp; Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. &nbsp; Minimum Qualifications Hold and maintain a valid Motor Vehicle Operator’s License, proper insurance, and a driving record satisfactory to the College required. 1. Class B CDL is preferred. 2. Pass a required physical examination and background check required. 3. At least two years’ experience in general maintenance work preferred. 4. Completion of 12th grade or equivalent preferred. 5. General knowledge of one or more of the building trades or apprenticeship in one or more of the building trades preferred. 6. Pesticide operator license preferred. 7. Ability to follow written and oral instructions. &nbsp; ADDENDUM TO CLASSIFICATION/JOB DESCRIPTION &nbsp; LIABILITY, PROTECTION AND SETTLEMENT FUND CHECKLIST &nbsp; The College’s top administration, building directors, and maintenance staff have a responsibility to monitor the physical plant for defects, problems and activities utilizing the facilities that may expose the college to a liability situation. The following list represents the type of items that should be monitored: &nbsp; 1. any defects or deficiencies in machines, tools, and equipment; 2. the existence of any pot holes in the parking lots or in the asphalt walkways; 3. any problems with stairs, carpets, and tiles; 4. any ice or debris on walk areas; 5. any unsafe or broken chairs or furniture; 6. any damage to safety signs or devices; 7. any burnt out, broken or not turned on lighting; and 8. any activities by students, staff, or faculty which might cause damage to property or persons (leaving doors unlocked, speeding on campus, etc.)

Rock Valley College

Maintenance II/Grounds

Title: NCCER Core Construction Instructor
Employee Classification:&nbsp;Part-time/Temporary
Institution:&nbsp;Northeast State Community College
Department: Adult Education
Campus Location: Northeast State at Kingsport
Salary: $30.00 hourly
Job Summary
Reporting to the Program Director for Adult Education, the Adult Ed - NCCER Core Construction Instructor will teach NCCER Core Curricula which includes safety, basic craft skills, power tool, shop tool and hand tool usage to the apprentices. Communication and construction drawings are also components of the Core Curricula this position will be responsible for teaching.
Job Duties
• Deliver NCCER Core field-specific lab training content to a diverse audience
• Drive improvement in process effectiveness and efficiency
• Complete other assignments as directed by supervision
Minimum Qualifications
• Specific NCCER Core Curricula experience for instruction material being delivered
• Experience in an industrial setting or other qualifying experience as approved by supervision
• Experience as a teacher in a vocational/technical construction or maintenance-related training program 
Preferred Qualifications
• Valid NCCER certifications
• Expertise in the field
• Previous teaching experience in skilled trades
• Conversational Ability or fluency in a second language.
Knowledge, Skills, and Abilities
• Technology Skills: MS Office skills, Word, Excel, Outlook; digital records management systems; general operating systems and data information systems • Capable of learning new technology and applying the new technology in the lab environment 
For assistance regarding the job ad, application process, or application status, please contact the Office of Human Resources at 423-354-5183 or <a href="mailto:HRstaffing@northeaststate.edu" target="_blank">HRstaffing@northeaststate.edu</a>.
Special Instructions to Applicants: To be considered for a position at Northeast State, you must create an online application. A resume and unofficial transcripts are required; a cover letter is optional. You will also be required to provide the contact information for a minimum of three (3) professional references. Your skills, abilities, qualifications, and years of experience will be evaluated using only what is recorded on your application. Please note that attaching a resume does not substitute for completion of the application form. Part-time work experience is calculated at 50% of full-time experience.

49 Facilities Management Full Time Jobs